Automatic high coverage blades – N Carlit

Description

The automatic cover model Carlit N-con system limit is ideal for installing on the floor in existing swimming pools whose measures do not exceed:

• 3×18 m more ladder
• 4×17 m more ladder
• 5×17 m more ladder
• 6×16 m more ladder
• 7×14 m more ladder

It is important to note that when a high kind of coverage, the winding shaft is located outside the pool, resting on fixed supports in the area surrounding the pool.

KIT MECHANIC:

It comprises:

• Two stainless steel feet. lacquered white or sand color. Filmography
• anodized aluminum Ø146mm axis (up to 12MT) and Ø196mm (up to 17mt)
• tubular motor 24V with Limit setting.
• Key switch with automatic reset to zero.
• Table plates with 220 / 24V transformer.

The colors of the blades can be:

• flat PVP White
• PVP smooth Sand
• Gray smooth PVP
• PVP smooth gray Mean
• Polycarbonate Solar Blue
• Clear Polycarbonate
• Clear Polycarbonate Solar
• Polycarbonate Solar Gray

Filmography

Directions for use and hibernation

We recommend that you follow these simple guidelines for the proper functioning of the automatic cover:

• Before any action on the cover, you must ensure that no person is not in the pool and there are no objects that might obstruct the correct maneuver.

• To maintain a good level of water is also important since a level too low or too high can cause a blockage of the beam, the separation wall or ladder.

• During the maneuvers to cover or close to not block the cover, this action may be dangerous, besides being detrimental to the operating mechanism.

• When using an automatic cleaner must verify that the opening operation of the cover was not wrapped around the pipe or power cable.

• It is recommended to regularly clean cover with a pressure cleaner or a liquid descaling PVC. We must also avoid the leaves stay on the coverage as they can stain the slides.

• In the case of hail recommend that collection coverage.

• In the submerged model (buried) Roussillon, Roussillon II, we recommend you always keep dry the motor housing to prevent it from getting wet

  .

For a good sleep and that in the spring find the pool in the best conditions, we must follow these basic tips:

• Leave the peeled cover on the water level.

• Maintain regular water level. A possible excess must be removed from the drain or the drain of skimmers.

• It is advisable to clean the valve and the motor housing with a high-pressure cleaner before the pool hibernation.

• We put a series of anti-ice floats in the valve housing, behind the cover. We must also protect the skimmers with some anti-ice buoys.

• recommended to install a cover to prevent leaves and other waste may hide valve. This cover should be cleaned regularly.

• In the case of ice formation, we recommend not to press the blades becomes not damaged.

• In the case of the engine flood risk, it is advisable to cut the power supply of the electrical box and disassemble the engine.