Description
Analyzer like to EC-07
CHARACTERISTICS
Description: Field test kit for copper analysis.
Method: colour card
Scale: 0.05, 0.1, 0.15, 0.2, 0.3, 0.5, 0.7, 1.0 ppm Cu
Number of tests: 55 (with reagents supplied)
COMPONENTS
1 x Copper reagent A
1 x copper reagent B
1 x test tube
1 x colour comparison chart
INSTRUCTIONS FOR USE
1. rinse and fill the tube to the 10 mL line with the water sample.
2. Add 5 drops of Copper Tape A. and shake to Mix.
3. Add 5 drops of Copper Tape B. and swirl to mix.
4. Wait 3 minutes for colour to develop.
5. Remove the cap and place the base of the tube about 1.5 cm above the centre of the colour chart.
6. Compare the colour of the tube with those on the chart by looking through the mouth of the tube.
NOTE: Empty and clean the tube immediately after testing.
Strip analyser
The LaMotte Insta-Test® test strips allow the user to keep the water balanced. The design of the pack ensures protection against moisture thanks to its desiccant coating inside.
Reviews
There are no reviews yet.