Smarlink flowmeter – WEATHERMATIC en ligne

Description

Threaded retaining nut facilitates maintenance in a valve box

Molded mounting tee provides consistent measurements and improved performance.

Four light blade propeller is sensitive enough to measure lower flow rates

Smart electronics capable of better filtering the signal

Affordable enough to install on almost any new and old system

Slip type T-flow sensor

FLOW RANGE

• 0.25 to 15 FPS

PRESSURE RATING

• 240 PSI Maximum working pressure Saddle type T-flow sensor

FLOW RANGE

• 3″ saddle: 6 to 300 gpm 4″ saddle: 10 to 480 gpm 6″ saddle: 45 to 1100 gpm

PRESSURE RATING

• 150 psi @ 90°F

PROFESSIONAL MATERIALS

• Impeller – HDPE (High Density Polyethylene)
• Shaft – Tungsten Carbide
• O-ring – Buna-N
• Saddle, Sensor Housing, Retaining Nut – Type 1 PVC

TEMPERATURE RANGE

• 32° F to 140° F (0° to 60° C)

OUTPUT SIGNAL

• Frequency range: 0.3 Hz to 200 Hz Pulse output: 5 ms +/-25%

TRANSDUCER PERFORMANCE

• Quiescent current: 600 uA@8 VDC at 35 VDC max.
• Quiescent voltage: (VHigh)= Supply voltage – (600uA X Supply impedance).
• On State: (VLow)= Max 1.2 VDC@50mA current limit, (10Ω +0.7VDC)

ELECTRICAL CABLE

• 2conductor solid copper single conductor U.L. #18 AWG with direct burial insulation
• Lead length: 48 inches
• Wiring can be extended up to 2,000 feet with shielded twisted pair cable and direct burial Brass threaded type T-flow sensor

FLOW RANGE

• 0.50 to 15 FPS 3 to 90 GPM (11 to 340 LPM)

PRESSURE RATING

• 250 PSI Maximum Working Pressure

PROFESSIONAL MATERIALS

• Impeller – HDPE (High Density Polyethylene)
• Mounting Tee & Retaining Nut – Lead-free Bronze Alloy C89833 Federalloy I-836
• Shaft – Tungsten Carbide
• O-ring – Buna-N
• Sensor Insert – Type 1 PVC

TEMPERATURE RANGE

• 32°F to 140° F (0° to 60° C)

OUTPUT SIGNAL

• Frequency range: 0.3 Hz to 200 Hz

TRANSDUCER PERFORMANCE

• Quiescent current: 120 uA@8 VDC to 35 VDC maximum.
• Out of State: (VHigh)= Supply voltage – (120uA X Source resistance) Over State: (VLow)= Max. 0.85 Volts@50mA, (10Ω +0.7VDC)

ELECTRICAL CABLE

• The standard version of the -001 electronics is fitted with 2 #18 AWG single conductor solid copper cables with direct burial insulation. Lead length 48 inches.
• Wiring can be extended up to 2,000 feet with shielded twisted pair cable with direct burial