Description
The plastic pumps BADU BETTAR Speck prestigious series were specially designed for the circulation of the pool water in combination with appropriate filtering equipment. The plastic parts that come into contact with medium are manufactured mostly reinforced polypropylene PP TV 40, with the consequent excellent corrosion resistance against the pool water and the usual water treatment means. The pump housing does not contain grafts. Thus, the body is recyclable. It can be installed up to 3 meters below the water level. Filmography
The motor shaft acts simultaneously as the pump shaft on which is subject to turbine. As for this fastener, a front fastener serves bellows which is seated on the plastic turbine hub. With the same obtains a safe separation between the pool water and the electric motor. Thanks to the mono-block construction, the pumps require little space. They are powered with three-phase or AC motors. The pump casing is integrated a basket pre-filter which keeps the pump away from the coarsest impurities.
Description:
The BADU BETTAR pumps are manufactured in Germany and designed for the circulation of pool water together with an installation fi adequate traction. Monobloc construction with a pre-filter basket.
Spotlight:
- motor shaft is not in contact with the water.
- Resistant to temperatures up to 60 ° C.
-
Corrosion resistant thanks to a high performance synthetic material 100% recyclable.
-
Self-priming.
|
SPEC. Strong> |
12M |
14M |
14T |
22M |
22T |
25M |
25T |
|
power (hp) |
0.75 |
1.15 |
1.15 |
1.5 |
1.5 |
2 |
2 |
|
Flow rate (m 3 / h) |
12 |
14 |
14 |
22 |
22 |
25 |
25 |
|
Connections (mm) |
50/50 |
63/50 |
63/63 |
75/63 |
|||
|
Weight (kg) |
12 |
15 |
17 |
17 |
|||
|
Pot. abs. P1 (W) |
770 |
1,250 |
1,000 |
1,650 |
1,800 |
1,850 |
2,000 |
|
Pot. rest. P2 (W) |
450 |
850 |
750 |
1,100 |
1,100 |
1,500 |
1,500 |
|
Int. Current (A) |
3.2 |
6.0 |
3.8 / 2.2 |
7.8 |
5.5 / 3.2 |
8.1 |
6.4 / 3.7 |
|
Max. (FAB) |
2.5 |
||||||
|
Protective index |
IP54 |
Reviews
There are no reviews yet.